Ocular Modelling Wax, 300g
High bond and hold in liquid form for ease of buildup.
Pure natural ingredients with extra clarity for simple and accurate cornea placement.
Excellent hot-to-cold bond for welding cornea unit in place.
High strength when cured. Confidently use at 3mm thickness, with care.
Easy carving and high-polish finishing.
Apply a separator to the stone mould.
Melt wax at low heat on a wax spoon. “DO NOT LET THE WAX BOIL”.
Fill the mould completely in one go.
Once the edge starts to whiten start to add wax slowly to start forming the anterior.
Be patient and follow the whiting rule.
Allow the wax to cool off naturally once it is the shape you require.
DO NOT TRY TO COOL OR PUT IT INTO A FRIDGE.
This will affect the wax’s unique properties.
TIP: Once the wax has cooled off, smooth it off with a blow torch to save time in the carving
Once the wax is cured and cool remove it from the mould.
Carve with a knife of your choice and smooth off with a woven cheesecloth or such, and polish
with a paper hand towel. Repeat until you have your desired shape.
top of page
bottom of page