Group Homepage
The same method can also be used for fabricating extraoral prostheses.
Place a Mini/Maxi Transfer Magnet on the matching size Magnacap/Magnabutment/
Root Keeper using a Hand Capfit Tool/Seating Tool.
When seated, the magnet automatically releases from the tool.
Root Keeper using a Hand Capfit Tool/Seating Tool.
When seated, the magnet automatically releases from the tool.
Take an impression with Transfer Magnets in place.
Seat Lab Analogue Abutments onto the Transfer Magnets and cast a model using
super hard stone plaster.
When the model is set remove the Transfer Magnets from the impression.
Clean, disinfect and autoclave sterilise for re-use.
super hard stone plaster.
When the model is set remove the Transfer Magnets from the impression.
Clean, disinfect and autoclave sterilise for re-
Place the Prosthesis Magnet with fitted Locator Ring on the replica keeper
In the model.
In the model.
Remove the Locator Ring after processing.
Check there is no resin on the magnet surface.
Do not grind or use metal instruments on the magnet surface.
Check there is no resin on the magnet surface.
Do not grind or use metal instruments on the magnet surface.